Cisco 352-011 Exam : Cisco Certified Design Expert Practical Exam

No help, full refund (352-011 - Cisco Certified Design Expert Practical Exam exam tests)

Generally, when you buy some goods, and if you find some flaw, the vendor often admit to replace the goods with you, even though the vendor reply to refund, the process is cumbersome and the money back to you is too slow. But Exam4Tests is different. If you don't pass the exam, you just need to send us your failure transcript of 352-011 exam test, then Exam4Tests will give you a full refund, thus the money you spent on 352-011 test won't be wasted. Actually the passing rate of CCDE 352-011 exam dumps is very high. We have already heard some good news from the customers who used the 352-011 Cisco Certified Design Expert Practical Exam exam dumps. So you can buy the 352-011 test dumps without any burden and worries. When you have bought 352-011 test dumps, you will enjoy the preferential treatment of one year free update, which means you will keep your information about 352-011 exam test all the latest.

Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Everyone has dream, although it is difficult to come true, we should insist on it and struggle to the last. So, if you are busy with 352-011 exam test and feel difficult, please insist on and do not give up. There are ways helping you to get out.

CCDE 352-011 exam dumps can provide some help for you. 352-011 Cisco Certified Design Expert Practical Exam exam questions & answers are codified by Cisco qualified experts. The 352-011 exam dumps simulated to the actual test and give you a high hit shot. With the high-quality and high accuracy of Cisco Certified Design Expert Practical Exam exam training, you can pass the 352-011 exam test with ease.

Good study guide and valid review material for a high passing rate

When you face the 352-011 exam, you must be no-mind and don't know what to do next. It is time to wake up and carry out actual plan. Cisco 352-011 training test will give you bright thoughts. When you attend 352-011 exam test, you should have a good knowledge of CCDE & 352-011 first, so you can visit Cisco CCDE and find the related information. Then, the most important thing is to go over the 352-011 study materials.

When you scan Cisco 352-011, you can pay attention to the exam code and name to ensure that is the right one you are looking for. Besides, you will find there are three different free 352-011 Cisco Certified Design Expert Practical Exam exam demos for you to download. You can do the demo test first to inspect the value of CCDE 352-011 test dumps. When you buy the 352-011 exam dumps, you can download it as soon as possible after payment, then you can do test and study. There are three files for you, if you want to do marks on papers, the 352-011 PDF file are the best for you. 352-011 PDF file can be printed to papers and it is convenient to mark the key points. If you want to test your ability and scores during the practice, the 352-011 SOFT and APP file are suitable for you. So you can control your test time and adapt the 352-011 actual test more confident.

With the aid of 352-011 exam dumps, your preparation will be well enough for the 352-011 certification. There is no problem to pass the 352-011 exam test.

Cisco 352-011 Exam Syllabus Topics:

Cisco Certified Design Expert Practical Sample Questions:

Question 1

Which three reasons to deploy an IDS sensor in promiscuous mode when you design a security solution are true? (Choose three.)

A. Solution should allow for stream normalization.
B. Solution should allow to deny packets inline.
C. Solution should be resistant to sensor failure.
D. Solution should allow for signature-based pattern matching.
E. Solution should not impact jitter and latency for voice traffic.

Question 2

Refer to the exhibit.

An enterprise has three sites over a Layer 2 Metro Ethernet ELAN service. 100Mb/s and 10 Mb/s links have been provisioned to provide redundancy for the head office. When OSPF routing enabled to provide connectivity and the correct bandwidth statement has been applied to each interface, the branch sites observe two equal-cost routes to the head office. The enterprise wants to send all traffic through the 100 Mb/s link and use the 10Mb/S link strictly as a backup. Which OSPF network type must be set to ensure that the head office 100 Mb/s circuit is preferred over the 10 Mb/s circuit, at the same time minimize the amount of configuration required on all of the routers throughout the network?

A. Point-to-multipoint
B. NBMA
C. Broadcast
D. Point-to-point

Question 3

Refer to the exhibit

company xyz has 150 branch location across the U.S. Each branch is connected to two aggregation router one router in each data center The network is configured with Multiple OSPF with multiple OSPF areas and the aggregation router are ABRs A requirement is to keep an optimal path to the data centers and at the same time reduce the LSA propagation and SPF recomputation during a change in any part of the network Which design elements should be included on the aggregation router?

A. OSPF totally stubby area
B. OSPF NSSA
C. OSPF summarization
D. distribute lists

Question 4

Why is a redundant PIM stub router topology a bad network design decision?

A. It interferes with IGMP snooping
B. It interfaces with PIM snooping
C. Multicast traffic duplication will occur
D. Multicast convergence takes long

Question 5

Refer to the exhibit.

Company ACME is adding a Cisco TelePresence system for real-time collaboration and wants to ensure the highest user experience. Drag and drop the necessary QoS mechanisms from the left to the right in any order.
Not all options will be used.

Solutions: