[Jan 13, 2024] 5V0-42.21 Dumps Full Questions - Exam Study Guide
VMware SD-WAN Design and Deploy 2021 Free Certification Exam Material from Exam4Tests with 53 Questions
NEW QUESTION # 28
Employees with an Apple iOS device have been causing congestion on the company's internet What should an administrator configure to target these devices when creating a Business policy for this issue?
- A. Match Source
- B. Match Destination
- C. Action Priority
- D. Action Network Service
Answer: C
NEW QUESTION # 29
Which role(s) must be enable under Gateway configuration page to allow a VMware SD-WAN Gateway to build IPsec tunnels to non-VM SD-WAN?
- A. Control Plane + Secure VPN Gateway
- B. Control Plane + Data Plane + Partner Gateway
- C. Control Plane
- D. Control Plane + Data Plane + SecureVPN Gateway
Answer: B
NEW QUESTION # 30
A technician at a customer site is deploying VMware SD-WAN Edge 620 notices that the Edge LED is shown amber.
What is the meaning of this LED color?
- A. Internet is not available from the Edge
- B. DNS is not reachable from the Edge.
- C. Edge is still booting.
- D. Edge is not activated.
Answer: A
NEW QUESTION # 31
What are three key benefits of VMware SD-WAN? (Choose three )
- A. Provision Edges in minutes
- B. Reduce the burden on MPLS
- C. Layer 2 VPNs between sites
- D. Automated configuration of cloud resources
- E. Gain visibility across any link
- F. Remove requirement of Edge devices
Answer: B,D,F
NEW QUESTION # 32
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Edge
- B. VMware SD-WAN Controller
- C. VMware SD-WAN Orchestrator
- D. VMware SD-WAN Hub
Answer: B
NEW QUESTION # 33
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
* Allow business abstraction so that similar policies can be applied across different hardware types.
* Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
* Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?
- A. Select Error Correct Before Steering with % definition
- B. Deselect Error Correct before Steering Defaults.
- C. Select WAN Link, and then define the DSCP tagging
- D. Select Transport Group, and then select Preferred option.
Answer: C
NEW QUESTION # 34
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?
- A. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
- B. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
- C. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)
- D. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
Answer: D
NEW QUESTION # 35
A customer is looking to have Quality of Service (QoS), resource allocations, link/path steering, and error correction applied automatically based on applications.
Which component of VMware SD-WAN helps the customer achieve this requirement?
- A. High Availability Configuration
- B. Branch Site Topologies
- C. Overlay Flow Control
- D. Business Policy Framework
Answer: D
NEW QUESTION # 36
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.
- B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- D. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.
Answer: C
NEW QUESTION # 37
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default. - B. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge. - C. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- D. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
Answer: D
NEW QUESTION # 38
A service provider needs to ensure that the NOC is notified proactively in the event that an Edge interface loses connectivity to its WAN provider.
Which three methods are available for generating these alerts? (Choose three.)
- A. Dyinq Gasp
- B. Push notification via the VMware SD WAN mobile app
- C. Text/SMS
- D. Webhook
- E. SNMP Trap
- F. Slack notification
Answer: A,B,C
NEW QUESTION # 39
Which three authentication mode options ate valid for use on the VMware SD-WAN Edge? (Choose three.)
- A. Certificate ate Optional
- B. Certificate Enabled
- C. Certificate Activated
- D. Certificate Disabled
- E. Certificate Requited
- F. Certificate Accepted
Answer: B,D,F
NEW QUESTION # 40
A service provider needs to upgrade a gateway to a new software version.
Which step in needed to complete the upgrade process?
- A. Re-assign the Gateway to a new gateway Pool with the appropriate software version, and then run 'sudo apt-get update'' from the Gateway console.
- B. Create a new disk partition to save the new software image to, modify the boot order via the Gateway BIOS to boot to the new partition, and then reboot the gateway.
- C. From the Orchestrator, select the check-box next to the appropriate gateway, choose ''Assign Software image", and then select the version for the upgrade.
- D. Copy the new image to/var/lib/velocloud/software_update.tar, and then run the upgrade thescript from the console.
Answer: B
NEW QUESTION # 41
Which statement is true about the VMware SD-WAN Gateway roles and assignments?
- A. The Primarily and Secondary Gateways share the load fur both internet traffic and VPN traffic
- B. Primary Gateway cannot be used as Super gateway for Edge-to-Edge communication, even it all the Edges have a common Primary gateway
- C. If the Primary Gateway goes down. Cloud internet traffic would failover to Secondary gateway automatically
- D. The SD-WAN Orchestrator assigns the Gateways to the Edge automatically when it comes up based Oil (lie location of the Edge Branch-to-branch will choose the right Gateway automatically
Answer: B
NEW QUESTION # 42
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?
- A. Segments
- B. Business Policy
- C. Firewall
- D. VLANs
Answer: A
Explanation:
https://kb.vmware.com/s/article/77153
NEW QUESTION # 43
A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses.
Which configuration must be implemented?
- A. Enable NAT hand off under hand off static routes configuration
- B. Configure source policy-based NAT under business- policies configuration
- C. Define multiple segments tor each customer
- D. Enable tag type QinQ under hand off interface configuration
Answer: C
NEW QUESTION # 44
Company a has recently acquired Company B, which has two remote office. Company A is using VMware hosted Cloud Gateways, and Company B is using a VMware SD-WAN with a Hub-Spoke topology.
Which VEware Cloud VPN solution an administrator configure to establish connectivity between the offices of Company A and Company B?
- A. Branch to Branch VPN
- B. Site-to-Site VPN
- C. Branch to CASH
- D. Branch to Non VMware SU-WAN Site
Answer: C
NEW QUESTION # 45
A customer would like to ensure that the traffic towards the Partner Gateway does not exceed a certain bandwidth.
Which feature should be used?
- A. Change the application priority to low.
- B. Enable the rate limit under a new custom Business Policy Rule.
- C. Modify the SD WAN Traffic Class and Weight Mapping
- D. Enable the SD-WAN Overlay Rate-Limit.
Answer: A
NEW QUESTION # 46
A technician needs to SSH to it VMware SU-WAN Virtual Edge runningversion 3.3.2. What is the default password?
- A. No password required
- B. adnim
- C. Password configured in cloud_init
- D. velocloud
Answer: C
NEW QUESTION # 47
......
Dumps Brief Outline Of The 5V0-42.21 Exam: https://www.exam4tests.com/5V0-42.21-valid-braindumps.html
Use Real 5V0-42.21 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=1ECf2oGysuIilI8EjlUyBt3MQL7QO-hrb