Latest May-2023 1z0-1091-22 Dumps PDF And Certification Training
Check your preparation for Oracle 1z0-1091-22 On-Demand Exam
NEW QUESTION # 31
A customer is starting an Advanced Meter Infrastructure (AMI) roll-out initiative and they plan to replace their legacy scalar time-of-use (TOU) meters with smart meters. They want customer information system (CIS) to continue to bill for the same TOU periods and they do not want to change the CIS rates.
In which THREE ways can you configure Meter Data Management (MDM) to support this requirement?
- A. Add a new usage calculation group with a TOU mapping rule.
- B. Set up the new usage calculation group to be identified dynamically by plug-in logic supplied on the usage subscription's type.
- C. Write a custom algorithm to determine the proper rate.
- D. Add an extendable lookup value containing the new device configuration type and the new usage calculation group.
- E. Add the TOU mapping rule to the existing usage calculation group.
Answer: B,D,E
Explanation:
Explanation
To support the requirement of replacing legacy scalar time-of-use (TOU) meters with smart meters without changing the CIS rates, you can configure Meter Data Management (MDM) in the following ways:
* Add an extendable lookup value containing the new device configuration type and the new usage calculation group: This is used to map the new device configuration type that is used for smart meters to a new usage calculationgroup that will be used to calculate bill determinants for smart meters. An extendable lookup value is a configurable value that can be used to define business rules or relationships between different objects.
* Add the TOU mapping rule to the existing usage calculation group: This is used to map the TOU periods of smart meters to the TOU periods of legacy meters. A TOU mapping rule is a usage calculation rule that is used to convert interval measurements into scalar measurements based on different TOU periods.
* Set up the new usage calculation group to be identified dynamically by plug-in logic supplied on the usage subscription's type: This is used to determine which usage calculation group will be used for each usage subscription based on certain criteria, such as device configuration type or service point type. A plug-in logic is a custom logic that can be developed by using Groovy scripting language or Java programming language.
You do not need to write a custom algorithm to determine the proper rate, which is a complex logic that can be developed by using Groovy scripting language or Java programming language. The proper rate can be determined by using the existing CIS rates and mapping them to smart meter TOU periods.
You do not need to add a new usage calculation group with a TOU mapping rule, which is a collection of usage calculation rules that are used to calculate bill determinants from measurements. You can add the TOU mapping rule to the existing usage calculation group instead of creating a new one.
NEW QUESTION # 32
Different validation, estimation, and editing (VEE) rules can be applied based on the VEE roles that categorize the source of the measurement data.
Which THREE VEE roles are provided as part of the base product?
- A. Retry
- B. Estimation
- C. Initial load
- D. Customer provided
- E. Manual override
Answer: C,D,E
Explanation:
Explanation
Different validation, estimation, and editing (VEE) rules can be applied based on the VEE roles that categorize the source of the measurement data. A VEE role is an attribute that indicates how measurement data was created or modified. Some of the VEE roles that are provided as part of the base product are:
* Manual override: This is a role that indicates that measurement data was manually entered or edited by a user.
* Initial load: This is a role that indicates that measurement data was loaded from an external source or system.
* Customer provided: This is a role that indicates that measurement data was provided by a customer.
Retry is not a VEE role that is provided as part of the base product. Retry is an action that can be performed on measurement data that has failed VEE rules.
Estimation is not a VEE role that is provided as part of the base product. Estimation is a process that can be performed on measurement data that is missing or invalid by using VEE rules.
NEW QUESTION # 33
Oracle Utilities Meter Data Management (MDM) DataConnect facilitates extraction of data for use in external applications such as energy management systems.
Which TWO can you export in the MDM version of DataConnect?
- A. Service points and install events
- B. Usage measurement data
- C. Configuration data
- D. Billing determinants
- E. Device events
Answer: B,D
Explanation:
Explanation
Oracle Utilities Meter Data Management (MDM) DataConnect is a feature that facilitates extraction of data for use in external applications such as energy management systems. According to the Oracle Utilities Meter Data Management Business User Guide, some examples of data that can be exported in the MDM version of DataConnect are:
* Billing determinants: These are usage data that have been divided into time-of-use periods and applied with factors for billing purposes. Billing determinants can be exported to a billing system or a customer information system for generating bills or invoices.
* Usage measurement data: These are raw or processed interval data that have been recorded by smart meters or other devices. Usage measurement data can be exported to an analytics system or a demand response system for analysis or optimization.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 9: Communications, Section 9.4: DataConnect
NEW QUESTION # 34
At which stage during the high-level process of loading interval initial measurement data does Meter Data Management (MDM) normalize measurements and why?
- A. Create the Final Measurements stage, so that each interval is stored as the adjusted value to represent an average interval value.
- B. Validation, Estimation, and Editing (VEE) stage, so that each interval can be compared to a specific date and time for validation.
- C. Create the Final Measurements stage, so that each interval measurement is stored as a single record for a specific date and time.
- D. Load the Initial Measurements stage, so that each interval measurement is stored as a single record for a specific date and time.
Answer: C
Explanation:
Explanation
Oracle Utilities Meter Data Management normalizes measurements during the Create the Final Measurements stage of loading interval initial measurement data. Normalization is the process of converting interval measurements into a common format that can be processed by Oracle Utilities Meter Data Management.
Normalization involves storing each interval measurement as a single record for a specific date and time, regardless of how they are received from smart meter systems.
Oracle Utilities Meter Data Management does not normalize measurements during other stages of loading interval initial measurement data, such as Load the Initial Measurements stage or Validation, Estimation, and Editing (VEE) stage. Normalization is not done for other purposes, such as validation or intervalization.
NEW QUESTION # 35
Which THREE features should you set up in the Cloud Service Payload Processing configuration?
- A. Key rings and key pairs
- B. Head-end systems (HES)
- C. File system directory SFTP setup
- D. Object Storage locations
Answer: A,C,D
Explanation:
Explanation
To set up the Cloud Service Payload Processing configuration, you should perform the following steps:
* File system directory SFTP setup: This is used to configure the secure file transfer protocol (SFTP) settings for transferring files between Oracle Utilities Smart Grid Gateway and Oracle Utilities Meter Data Management. You need to specify the SFTP host name, port number, user name, password, and directory path for inbound and outbound files.
* Key rings and key pairs: This is used to configure the encryption and decryption settings for payload files. You need to create key rings and key pairs for each communication type and associate them with message senders and receivers.
* Object Storage locations: This is used to configure the object storage settings for storing payload files in Oracle Cloud Infrastructure. You need to specify the object storage URL, bucket name, user name, password, and encryption key for each communication type.
You do not need to set up head-end systems (HES), which are external systems that communicate with smart meters and devices. Head-end systems are configured in Oracle Utilities Smart Grid Gateway, not in Oracle Utilities Meter Data Management.
NEW QUESTION # 36
Which THREE statements are true about the Subtractive Interval Data functionality?
- A. The IMD load processes calculate consumption in engineering units.
- B. You can optionally validate for rollover exceptions and negative consumption calculations.
- C. It validates consumption in initial measurement data (IMD).
- D. A new reading condition field ensures that you do not lose the reading quality when a meter's consumption is estimated.
- E. It converts engineering units into reads.
Answer: A,B,D
Explanation:
Explanation
The Subtractive Interval Data functionality is a feature that enables Meter Data Management (MDM) to process interval data from devices that do not provide interval readings, but only cumulative readings. The Subtractive Interval Data functionality performs the following actions:
* The IMD load processes calculate consumption in engineering units: The IMD load processes are batch processes that load initial measurement data (IMD) records from smart meter systems or other sources into MDM. The IMD load processes calculate consumption in engineering units by subtracting consecutive cumulative readings and applying conversion factors.
* A new reading condition field ensures that you do not lose the reading quality when a meter's consumption is estimated: A reading condition field is an attribute that indicates the quality or status of a measurement, such as valid, invalid, estimated, or substituted. A new reading condition field called Original Reading Condition is added to store the original reading condition of a cumulative reading when its consumption is estimated by using VEE rules.
* You can optionally validate for rollover exceptions and negative consumption calculations: You can configure VEE rules to check for rollover exceptions and negative consumption calculations when processing subtractive interval data. A rollover exception occurs when a cumulative reading reaches its maximum value and resets to zero. A negative consumption calculation occurs when a cumulative reading decreases instead of increasing.
It is not true that it validates consumption in initial measurement data (IMD), which are records that store the raw measurement data that is received from smart meter systems or other sources. Subtractive Interval Data functionality does not validate consumption in IMD, but calculates consumption from cumulative readings.
It is not true that it converts engineering units into reads, which are values that are recorded by devices at certain intervals or events. Subtractive Interval Data functionality does not convert engineering units into reads, but calculates consumption in engineering units from cumulative readings.
NEW QUESTION # 37
In SaaS, which THREE configuration steps would you perform to convert natural gas volume to energy at the measuring component level?
- A. Configure a value derivation algorithm by using Java.
- B. Create value identifiers far the energy Unit of Measure (UOM) on the device.
- C. Create value identifiers far the energy UOM on the measuring component type.
- D. Set up a factor to hold the conversion values.
- E. Configure a value derivation algorithm by using Groovy.
Answer: C,D,E
Explanation:
Explanation
To convert natural gas volume to energy at the measuring component level, you should perform the following configuration steps:
* Set up a factor to hold the conversion values: A factor is a value that is used to adjust or convert measurements based on certain criteria. You need to set up a factor to hold the conversion values that are used to convert natural gas volume to energy. For example, you can set up a factor that holds the heating value of natural gas in different units of measure (UOM).
* Configure a value derivation algorithm by using Groovy: A value derivation algorithm is a rule that is used to calculate derived values from raw measurements based on certain factors or formulas. You need to configure a value derivation algorithm by using Groovy scripting language to define how natural gas volume is converted to energy by applying the conversion factor.
* Create value identifiers for the energy UOM on the measuring component type: A value identifier is an attribute that is used to store measurement or derived values in different UOMs. You need to create value identifiers for the energy UOM on the measuring component type that is used for natural gas devices. For example, you can create value identifiers for energy in British thermal units (BTU) or kilowatt-hours (kWh).
You do not need to create value identifiers for the energy UOM on the device, which is an instance of a device type that is installed at a service point. Value identifiers are defined at the measuring component type level, not at the device level.
You do not need to configure a value derivation algorithm by using Java, which is a programming language that is used to develop custom applications or extensions. Value derivation algorithms are configured by using Groovy scripting language, not Java.
NEW QUESTION # 38
What are the THREE uses of the Smart Grid Gateway (SGG)?
- A. Communicating directly with meters
- B. Sharing outage information with outage management systems
- C. Sharing customer information
- D. Connecting to Smart Meter systems
- E. Sharing event information with downstream systems
Answer: B,D,E
Explanation:
Explanation
The Smart Grid Gateway (SGG) is a middleware component that provides integration between Oracle Utilities Meter Data Management and smart meter systems. The SGG has three main uses:
* Sharing event information with downstream systems: The SGG can process events from smart meter systems and send them to downstream systems, such as customer information systems (CIS), outage management systems (OMS), ordistribution management systems (DMS). Events are occurrences that happen on devices or networks, such as tampering, low battery, or power outage.
* Connecting to Smart Meter systems: The SGG can communicate with smart meter systems using various protocols and adapters. The SGG can support multiple smart meter systems simultaneously and provide a common interface for Oracle Utilities Meter Data Management.
* Sharing outage information with outage management systems: The SGG can process outage events from smart meter systems and send them to outage management systems for analysis and restoration. Outage events are events that indicate a loss or restoration of power on a device or network.
The SGG does not share customer information or communicate directly with meters. Customer information is managed by Oracle Utilities Customer Cloud Service or Oracle Utilities Customer Care and Billing.
Communication with meters is handled by smart meter systems that connect to the SGG.
NEW QUESTION # 39
Initial measurement data (IMD) is imported into Meter Data Management (MDM) and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What has the IMD passed in this case?
- A. Critical validation
- B. Critical validation, high/low check validation, and sum check validation
- C. High/low check validation
- D. Multiplier check validation
- E. Sum check validation
Answer: A
Explanation:
Explanation
Initial measurement data (IMD) are raw measurement data that are imported into Oracle Utilities Meter Data Management from various sources, such as head-end systems, meter reading systems, or manual entry. IMD can be viewed through the Measuring Component portal, but they are not ready for export or further processing until they pass validation, estimation, and editing (VEE) processing. VEE processing is a set of rules and algorithms that check and correct measurement data for any gaps, errors, or anomalies. According to the Oracle Utilities Meter Data Management Business User Guide, one type of VEE rule that IMD must pass in order to become final measurement data is:
* Critical validation: This is a rule that checks whether IMD meet certain minimum criteria for quality and completeness. Critical validation can be used to filter out IMD that are missing, duplicated, corrupted, or invalid.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 7: Measurements, Section
7.1: Measurement Data; Chapter 8: Usage, Section 8.3: Validation, Estimation, and Editing
NEW QUESTION # 40
Which THREE Validation, Estimation, and Editing (VEE) rules are provided by the base Meter Data Management (MDM) product that you can include in a VEE group?
- A. Interval averaging
- B. Negative consumption check
- C. Estimate data based on nearby addresses
- D. Positive consumption check
- E. High/low check
Answer: B,D,E
Explanation:
Explanation
The base Meter Data Management (MDM) product provides several Validation, Estimation, and Editing (VEE) rules that you can include in a VEE group. A VEE group is a collection of VEE rules that are used to validate, estimate, and edit measurements based on certain criteria. Some of the VEE rules that are provided by the base MDM product are:
* Positive consumption check: This is a rule that checks if the consumption value of a measurement is positive. If the consumption value is negative, the rule flags the measurement as invalid and estimates a new value based on historical data or other methods.
* Negative consumption check: This is a rule that checks if the consumption value of a measurement is negative. If the consumption value is positive, the rule flags the measurement as invalid and estimates a new value based on historical data or other methods.
* High/low check: This is a rule that checks if the consumption value of a measurement is within a predefined range. If the consumption value is above or below the range, the rule flags the measurement as invalid and estimates a new value based on historical data or other methods.
Estimate data based on nearby addresses is not a VEE rule that is provided by the base MDM product. This is a custom VEE rule that can be developed by using Groovy scripting language or Java programming language.
Interval averaging is not a VEE rule that is provided by the base MDM product. This is a usage calculation rule that is used to calculate derived values from interval measurements by averaging them over a certain period.
NEW QUESTION # 41
Which TWO functions can the service point-measurement cycle relationship of Meter Data Management (MDM) perform?
- A. Initiate request of bill determinants from subscribing systems.
- B. Create hand-held download read activities.
- C. Initiate push of bill determinants ta subscribing systems.
- D. Create optimal meter reader routes by measurement cycle.
Answer: A,C
Explanation:
Explanation
The service point-measurement cycle relationship of Meter Data Management (MDM) can perform the following functions:
* Initiate request of bill determinants from subscribing systems: A subscribing system is an external system or service provider that receives bill determinants from MDM. A bill determinant is a value that is used to calculate a bill for a service point or device. The service point-measurement cycle relationship can initiate a request of bill determinants from subscribing systems based on the measurement cycle schedule. A measurement cycle schedule defines the dates on which devices are scheduled to be read for a given measurement cycle. A measurement cycle defines the schedule for manual meter reading of devices at service points in that cycle.
* Initiate push of bill determinants to subscribing systems: The service point-measurement cycle relationship can also initiate a push of bill determinants to subscribing systems based on the measurement cycle schedule. This means that MDM can send bill determinants to subscribing systems automatically or on demand.
The service point-measurement cycle relationship cannot perform the following functions:
* Create optimal meter reader routes by measurement cycle: A meter reader route is a sequence of service points or devices that are assigned to a meter reader formanual meter reading. A meter reader route is not created by the service point-measurement cycle relationship, but by using other configurations, such as route type or route sequence.
* Create hand-held download read activities: A hand-held download read activity is an activity that downloads measurement data from a hand-held device to MDM. A hand-held download read activity is not created by the service point-measurement cycle relationship, but by using other configurations, such as activity type or activity status.
NEW QUESTION # 42
The interval proxy day estimation Validation, Estimation, and Editing (VEE) rule estimates missing intervals by selecting interval data to average from a list of days that are most like the day being estimated. This is achieved by measuring the component comparison periods.
What is used to define the proxy?
- A. Weather data
- B. Like premise
- C. Neighbor
- D. Customer class profile
Answer: A
Explanation:
Explanation
The interval proxy day estimation VEE rule is a rule that estimates missing intervals by selecting interval data to average from a list of days that are most like the day being estimated. This is achieved by measuring the component comparison periods, which are periods of time that are used to compare different days based on certain criteria. According to the Oracle Utilities Meter Data Management Business User Guide, one factor that is used to define the proxy or the list of days that are most like the day being estimated is:
* Weather data: This is data that indicates the temperature or other weather conditions for a given day.
Weather data can be used to select days that have similar weather patterns or variations as the day being estimated.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 8: Usage, Section 8.3:
Validation, Estimation, and Editing; Section 8.3.2: Interval Proxy Day Estimation
NEW QUESTION # 43
Which relationship must be established with an external system or a service provider before creating bill determinants in Meter Data Management (MDM)?
- A. Usage factor
- B. Usage rule
- C. Usage transaction
- D. Usage subscription
Answer: D
Explanation:
Explanation
A usage subscription is a relationship that must be established with an external system or a service provider before creating bill determinants in Meter Data Management (MDM). A usage subscription defines the external system or service provider that will receive the bill determinants, the usage calculation group that will be used to calculate the bill determinants, and the service points that will provide the measurement data for the bill determinants.
You do not need to establish a usage factor, a usage transaction, or a usage rule with an external system or a service provider before creating bill determinants. A usage factor is a value that is used to adjust or convert measurements based on certain criteria. A usage transaction is a record that stores the bill determinants and other usage information for a usage subscription. A usage rule is a rule that is used to calculate, validate, or estimate bill determinants based on certain criteria.
NEW QUESTION # 44
In the SaaS solution, how should you configure equipment that attaches to an asset, such as a communication module attached to a meter?
- A. Set up a component
- B. Add a sub-asset
- C. Create a master child asset
- D. Add a constituent part
Answer: A
Explanation:
Explanation
To configure equipment that attaches to an asset, such as a communication module attached to a meter, you should set up a component. A component is a part of an asset that can be installed and removed independently of the asset. You can define component types and associate them with asset types. For example, you can define a communication module component type and associate it with a meter asset type2.
You do not need to create a master child asset, which is a relationship between two assets that are installed at different service points but are functionally related. For example, you can define a transformer as a master asset and a meter as a child asset2. A master child asset is not suitable for equipment that attaches to an asset.
You do not need to add a sub-asset, which is an asset that is installed at the same service point as another asset but has its own measuring components and usage subscriptions. For example, you can define a meter as a sub-asset of another meter if they share the same service point but have different measurements2. A sub-asset is not suitable for equipment that attaches to an asset.
You do not need to add a constituent part, which is an attribute of an asset that cannot be installed or removed independently of the asset. For example, you can define a battery as a constituent part of a meter if it is embedded in the meter and cannot be replaced . A constituent part is not suitable for equipment that attaches to an asset.
NEW QUESTION # 45
Usage transactions can contain date breaks. What is used to supply date breaks?
- A. Usage subscription type
- B. Usage subscription BO
- C. Requesting system or user input
- D. Deferred monitor calculation algorithm
Answer: C
Explanation:
Explanation
Usage transactions can contain date breaks, which are dates that divide a usage period into sub-periods based on certain criteria or events. Date breaks are used to supply datebreaks for usage transactions. Date breaks are specified by the requesting system or user input when requesting a usage transaction. A requesting system is an external system or service provider that requests bill determinants from MDM. A user input is a manual entry of data by a user.
Usage subscription BO is not used to supply date breaks for usage transactions. A usage subscription BO is a business object that defines the relationship between a service point and a subscribing system.
Usage subscription type is not used to supply date breaks for usage transactions. A usage subscription type is a configuration that defines the properties and rules for a usage subscription.
Deferred monitor calculation algorithm is not used to supply date breaks for usage transactions. A deferred monitor calculation algorithm is a custom logic that can be developed by using Groovy scripting language or Java programming language. A deferred monitor calculation algorithm is used to perform certain calculations or validations on usage transactions after they are created.
NEW QUESTION # 46
Which TWO functions can the service point-measurement cycle relationship of Meter Data Management (MDM) perform?
- A. Initiate request of bill determinants from subscribing systems.
- B. Create hand-held download read activities.
- C. Initiate push of bill determinants ta subscribing systems.
- D. Create optimal meter reader routes by measurement cycle.
Answer: A,C
Explanation:
Explanation
The service point-measurement cycle relationship of Meter Data Management (MDM) can perform the following functions:
* Initiate request of bill determinants from subscribing systems: A subscribing system is an external system or service provider that receives bill determinants from MDM. A bill determinant is a value that is used to calculate a bill for a service point or device. The service point-measurement cycle relationship can initiate a request of bill determinants from subscribing systems based on the measurement cycle schedule. A measurement cycle schedule defines the dates on which devices are scheduled to be read for a given measurement cycle. A measurement cycle defines the schedule for manual meter reading of devices at service points in that cycle.
* Initiate push of bill determinants to subscribing systems: The service point-measurement cycle relationship can also initiate a push of bill determinants to subscribing systems based on the measurement cycle schedule. This means that MDM can send bill determinants to subscribing systems automatically or on demand.
The service point-measurement cycle relationship cannot perform the following functions:
* Create optimal meter reader routes by measurement cycle: A meter reader route is a sequence of service points or devices that are assigned to a meter reader formanual meter reading. A meter reader route is not created by the service point-measurement cycle relationship, but by using other configurations, such as route type or route sequence.
* Create hand-held download read activities: A hand-held download read activity is an activity that downloads measurement data from a hand-held device to MDM. A hand-held download read activity is not created by the service point-measurement cycle relationship, but by using other configurations, such as activity type or activity status.
NEW QUESTION # 47
Assets and components can have specifications associated with them to describe design details and asset attributes.
Which THREE are correct Smart Meter specifications?
- A. Manufacturer
- B. Asset type
- C. Asset disposition
- D. Asset age
- E. Firmware
Answer: A,B,E
Explanation:
Explanation
Asset and component specifications are used to describe design details and asset attributes that are common to a group of assets or components. According to the Oracle Utilities Meter Solution Cloud Service Business User Guide, some examples of smart meter specifications are:
* Firmware: The software version installed on the smart meter
* Asset type: The category of the smart meter, such as electric, gas, water, or heat
* Manufacturer: The company that produced the smart meter
References: Oracle Utilities Meter Solution Cloud Service Business User Guide, Chapter 3: Asset Management, Section 3.2: Asset and Component Specifications
NEW QUESTION # 48
Why would you use an eligibility criteria in usage subscription?
- A. To determine whether a usage subscription generates a usage transaction.
- B. To configure an optional validation group within a usage subscription.
- C. To configure an optional usage group within a usage subscription.
- D. To configure an optional usage calculation rule within a usage calculation group for the usage.
Answer: A
Explanation:
Explanation
A usage subscription is a record that defines how usage data are collected, processed, and exported for a service point or a device. A usage subscription can have various components that specify the logic and parameters for performing various operations on usage data, such as validation, estimation, editing, calculation, or export. According to the Oracle Utilities Meter Data Management Business User Guide, one example of a component that can be configured in a usage subscription is:
* Eligibility criteria: These are rules that determine whether a usage subscription generates a usage transaction or not. A usage transaction is a record that contains usage data that are ready for export to other systems, such as customer information system (CIS) or settlement system. Eligibility criteria can be used to filter out usage subscriptions that do not meet certain conditions or requirements for generating usage transactions.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 8: Usage, Section 8.1:
Usage Subscriptions
NEW QUESTION # 49
From where is the final measurement condition code created?
- A. Pre-VEE condition code
- B. Post-VEE condition code
- C. Raw condition code
- D. Condition code sent from head-end system (HES)
Answer: B
Explanation:
Explanation
Measurement condition codes are codes that indicate the quality or status of measurement data, such as raw, estimated, edited, validated, or final. Measurement condition codes are assigned at different stages of processing measurement data and can affect how measurement data are used for billing or analysis purposes.
According to the Oracle Utilities Meter Data Management Business User Guide, the final measurement condition code is created from:
* Post-VEE condition code: This is the condition code that is assigned after validation, estimation, and editing (VEE) processing has been performed on measurement data. VEE processing is a set of rules and algorithms that check and correct measurement data for any gaps, errors, or anomalies. The post-VEE condition code reflects the outcome of VEE processing and determines whether measurement data are ready for export or further processing.
References: Oracle Utilities Meter Data Management Business User Guide, Chapter 7: Measurements, Section
7.2: Measurement Condition Codes
NEW QUESTION # 50
......
Valid 1z0-1091-22 Dumps for Helping Passing Oracle Exam: https://www.exam4tests.com/1z0-1091-22-valid-braindumps.html
Practice Exam 1z0-1091-22 Realistic Dumps Verified Questions: https://drive.google.com/open?id=1q00O4mRxIS8rsWJs0rcYEseYvlBudVhC