New Fortinet FCP_FWF_AD-7.4 Dumps & Questions Updated on 2025
Dumps to Pass your FCP_FWF_AD-7.4 Exam with 100% Real Questions and Answers
NEW QUESTION # 41
If an organization wants to provide temporary network access for visitors, which feature would be most suitable?
Response:
- A. FortiGate guest management feature
- B. Advanced bridge mode options
- C. VLANs on SSIDs
- D. FortiAP load balancing
Answer: A
NEW QUESTION # 42
A wireless station successfully connects to a wireless network and fails to communicate with other devices on the network or access the internet. As an administrator, what two pieces of information must you collect to troubleshoot the issue?
(Choose two.)
Response:
- A. Monitor whether the wireless network is experiencing high-level noise or distortion.
- B. Check the wireless station signal status with FortiAP.
- C. Verify whether the DHCP scope has an available IP address to assign.
- D. Confirm that the wireless client is compatible with FortiAP technology.
Answer: B,C
NEW QUESTION # 43
What might be the issue if multiple client devices can view an SSID but cannot connect to it?
Response:
- A. AP's capacity or security settings
- B. RF interference from external devices
- C. Signal strength
- D. Client devices' software version
Answer: A
NEW QUESTION # 44
A tunnel mode wireless network is configured on a FortiGate wireless controller. Which task must be completed before the wireless network can be used?
Response:
- A. The wireless network to Internet firewall policy must be configured
- B. The new network must be manually assigned to a FortiAP profile.
- C. The wireless network interface must be assigned a Layer 3 address
- D. Security Fabric and HTTPS must be enabled on the wireless network interface
Answer: A
NEW QUESTION # 45
Overlapping SSIDs in a high-density environment can lead to increased wireless performance.
Response:
- A. False
- B. True
Answer: A
NEW QUESTION # 46
Which configurations are required when deploying FortiAP devices using FortiAP Cloud?
(Select all that apply)
Response:
- A. Manage AP settings centrally through the cloud platform
- B. Configure FortiAP profiles in FortiAP Cloud
- C. Apply predictive modeling using FortiPlanner
- D. Set up FortiPresence analytics for monitoring
Answer: A,B
NEW QUESTION # 47
Which feature allows for the logical segregation of a wireless network without the need for multiple physical networks?
Response:
- A. VLANs on SSIDs
- B. Advanced bridge mode options
- C. FortiGate guest management
- D. FortiAP load balancing
Answer: A
NEW QUESTION # 48
How can you provision a FortiAP device?
Response:
- A. Using FortiPresence analytics
- B. Using FortiPlanner
- C. Using the FortiGate integrated wireless controller
- D. Directly via the FortiAP's web interface
Answer: C
NEW QUESTION # 49
Which of the following tools are associated with predictive modeling or analytics?
Response:
- A. FortiAP Cloud
- B. FortiPlanner
- C. FortiPresence
- D. FortiGate
Answer: B,C
NEW QUESTION # 50
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi?
(Choose two.)
Response:
- A. Social networks authentication
- B. Hardware security token authentication
- C. Short message service authentication
- D. Software security token authentication
Answer: A,C
NEW QUESTION # 51
What steps are necessary for provisioning and managing FortiAP devices using a FortiGate integrated wireless controller?
(Select all that apply)
Response:
- A. Configure a tunnel mode for all wireless networks
- B. Assign a VLAN to each SSID
- C. Create and apply a FortiAP profile
- D. Preauthorize APs on the FortiGate
Answer: C,D
NEW QUESTION # 52
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server?
(Choose three.)
Response:
- A. 64 Tunnel-Type
- B. 58 Egress-VLAN-Name
- C. 83 Tunnel-Preference
- D. 81 Tunnel-Private-Group-ID
- E. 65 Tunnel-Medium-Type
Answer: A,D,E
NEW QUESTION # 53
What can result if two APs have overlapping frequencies?
Response:
- A. RF interference
- B. Extended DHCP lease time
- C. Faster client device authentication
- D. Enhanced signal strength
Answer: A
NEW QUESTION # 54
Which of the following can contribute to optimizing wireless client experiences in a busy enterprise setting?
Response:
- A. Use of advanced bridge mode options
- B. Configuration of VLANs on SSIDs
- C. Activation of FortiAP and client load balancing
- D. FortiAP profiles deployment
Answer: A,C
NEW QUESTION # 55
Employees at the remote office reported speed issues with the wireless network. Dual-band FortiAP devices have been correctly deployed throughout the office to ensure coverage and optimal performance. However, employees have noticed that the wireless stations consistently connect to the 2.4 GHz network but not the 5 GHz network.
What must IT administrators perform to troubleshoot the issue?
Response:
- A. Confirm whether internet speed limits are preventing access to high speed by wireless stations.
- B. Review if FortiAP resources are not experiencing high CPU or memory usage.
- C. Verify that the allocated frequency channel on FortiAP is not exhausted.
- D. Disable the 2.4 GHz radio to force the wireless stations to connect.
Answer: C
NEW QUESTION # 56
Which features can be configured to improve the performance of wireless networks using FortiGate?
(Select all that apply)
Response:
- A. VLAN load-balancing
- B. SSID broadcast frequency adjustment
- C. Advanced bridge mode options
- D. FortiAP and client load balancing
Answer: A,C,D
NEW QUESTION # 57
......
Updated Exam FCP_FWF_AD-7.4 Dumps with New Questions: https://www.exam4tests.com/FCP_FWF_AD-7.4-valid-braindumps.html
Today Updated FCP_FWF_AD-7.4 Exam Dumps Actual Questions: https://drive.google.com/open?id=1JjP8qx1LEP5eQZcD8rflaAnyuwm2BLdu