[Nov-2021] H35-910-ENU Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
Pass Huawei H35-910-ENU Exam With Practice Test Questions Dumps Bundle
NEW QUESTION 134
Which of the following is the most influential safety incident?
- A. Inadvertently dropping the tool, causing damage to the cooling fan blade
- B. Barbaric work causes the cabinet door to be deformed and cannot be closed.
- C. The cable connector of the climbing operation falls into the frame and poses a safety hazard.
- D. Power supply short circuit caused by DC power distribution operation in the equipment room
Answer: D
NEW QUESTION 135
Partner personnel must communicate with the project manager and regional service manager in advance before they can appear.
- A. False
- B. True
Answer: A
NEW QUESTION 136
The site environmental risk assessment needs to be carried out on the day of the upper station.
- A. False
- B. True
Answer: A
NEW QUESTION 137
What are the functions of the double hook safety rope? (Multiple Choice)
- A. used for up and down the towers
- B. Safety protection on the tower
- C. For positioning
- D. With shock absorber to prevent falling
Answer: A,B,D
NEW QUESTION 138
What is the correct one for the operation of live equipment and circuits?
- A. Everyone can operate live equipment and circuits as long as they are insulated.
- B. Operation of live equipment and circuits can only be carried out by personnel with relevant qualifications
- C. Powerful operation requires qualified personnel to perform, weak power does not need
Answer: B
NEW QUESTION 139
Which of the following should be noted for the storage of goods? (Multiple choice)
- A. Meet the stacking limit layer number requirement
- B. Does not affect the fire exit
- C. Cannot be stored outdoors
- D. Floor load should meet the requirements
Answer: A,B,C,D
NEW QUESTION 140
Which of the following tasks does the closed-loop phase of "high-risk operations" need to complete? (Multiple choice)
- A. Network element and network management data backup
- B. Confirmation of project operation completion
- C. Operation is not completed as planned, or there are legacy issues
- D. Recording of major operational records
Answer: B,C,D
NEW QUESTION 141
Which of the following equipments need to be installed within 45 of the lightning rod (Multiple Choice)
- A. Antenna
- B. GPS antenna
- C. BBU
- D. Filter
Answer: A,B,D
NEW QUESTION 142
When cutting the cable, it is necessary to leave a proper margin. Which of the following statements about the margin reserve is reasonable?
- A. Reserve 1.5m margin for the jumper
- B. Reserve 1.5m margin for the power cord
- C. CPRI reserves 0.5m margin first
- D. Reserve 0.5m margin for feeder
Answer: D
NEW QUESTION 143
Which of the following should be noted when indoor climbing? (Multiple Choice)
- A. The ladder for truck work should be balanced and stable
- B. Prevent tools and materials from falling
- C. Power tools cannot be used for climbing work
- D. Personnel below the work area should be evacuated
Answer: A,B,D
NEW QUESTION 144
The office-portable hard disk with the Huawei operating system is removed and hung on the personal computer. It is a bypass of the company's security control behavior. When the information security violates the specified level, it will increase the level of processing.
- A. False
- B. True
Answer: B
NEW QUESTION 145
What are the precautions in the field? (Multiple Choice)
- A. If you have a meal, you should have enough food ready.
- B. Can't work too late
- C. Wear non-slip flat shoes suitable for field work, tight clothing
- D. In order to prevent being robbed and harmed by dangerous animals, generally more than two people are required.
Answer: A,B,C,D
NEW QUESTION 146
Which of the following statement is true about the input voltage of the BBU3900?
- A. +24V
- B. -48V
- C. +36V
- D. -24V
Answer: B
NEW QUESTION 147
What are the correct descriptions of the operations that should be performed before the communication device is powered up? (Multiple choice)
- A. All power switches of the powered device are disconnected
- B. Rated output current meets the requirements of powered devices
- C. Check the electrical connection is firm and reliable
- D. The output switch of the power supply device is disconnected and the output voltage is normal.
- E. Measuring no short circuit inside the powered device
- F. Measure the power supply circuit without short circuit between each other and the ground
Answer: A,B,C,D,E,F
NEW QUESTION 148
When debugging finds that the usage version is defective, the engineering supervisor can receive the patch directly from the R&D expert.
- A. False
- B. True
Answer: A
NEW QUESTION 149
Which one does not belong to the WCDMA network structure?
- A. RNC
- B. eNodeB
- C. NodeB
- D. UE
Answer: B
NEW QUESTION 150
Which of the following is the only network element identifier in the BBU?
- A. UBBP
- B. UMPT
- C. ESN ( Electronic serial number )
- D. UPEU
Answer: C
NEW QUESTION 151
The use of a combiner can effectively save feeder resources.
- A. False
- B. True
Answer: B
NEW QUESTION 152
There are two main purposes for the preparation of the QC project. The first is to explain the quality assurance status of the company to the customer, and the second is to ensure the implementation of various quality assurance activities carried out by the company.
- A. False
- B. True
Answer: B
NEW QUESTION 153
Which of the following is the correct tool for measuring the azimuth of the antenna?
- A. Inclinometer
- B. Compass
- C. North Arrow
- D. Mobile phone
Answer: B
NEW QUESTION 154
Which of the following is the focus of safety accident work?
- A. Immediate emergency response
- B. Prevention
- C. Notification after processing
- D. Timely notification
Answer: B
NEW QUESTION 155
......
2021 Valid H35-910-ENU test answers & Huawei Exam PDF: https://www.exam4tests.com/H35-910-ENU-valid-braindumps.html