NSE7_EFW-7.0 PDF Dumps | Feb 26, 2023 Recently Updated Questions
NSE7_EFW-7.0 Exam Questions – Valid NSE7_EFW-7.0 Dumps Pdf
Fortinet NSE7_EFW-7.0 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 50
Examine the following partial outputs from two routing debug commands; then answer the question below:
Why the default route using port2 is not displayed in the output of the second command?
- A. It has a lower priority than the default route using port1.
- B. It has a higher distance than the default route using port1.
- C. It has a higher priority than the default route using port1.
- D. It is disabled in the FortiGate configuration.
Answer: B
NEW QUESTION 51
View the exhibit, which contains the output of diagnose sys session stat, and then answer the question below.
Which statements are correct regarding the output shown? (Choose two.)
- A. There are 0 ephemeral sessions.
- B. There are 166 TCP sessions waiting to complete the three-way handshake.
- C. No sessions have been deleted because of memory pages exhaustion.
- D. All the sessions in the session table are TCP sessions.
Answer: A,C
NEW QUESTION 52
Which statement about the designated router (DR) and backup designated router (BDR) in an OSPF multi-access network is true?
- A. BDR is responsible for forwarding link state information from one router to another.
- B. Non-DR and non-BDR routers will form full adjacencies to DR and BDR only.
- C. FortiGate first checks the OSPF ID to elect a DR.
- D. Only the DR receives link state information from non-DR routers.
Answer: B
NEW QUESTION 53
Examine the following routing table and BGP configuration; then answer the question below.
The BGP connection is up, but the local peer is NOT advertising the prefix 192.168.1.0/24 .
Which configuration change will make the local peer advertise this prefix?
- A. Enable the setting ebgp-multipath.
- B. Disable the setting network-import-check.
- C. Enable the redistribution of static routers into BGP.
- D. Enable the redistribution of connected routers into BGP.
Answer: B
NEW QUESTION 54
Which two statements about the Security Fabric are true? (Choose two.)
- A. Only the root FortiGate collects network information and forwards it to FortiAnalyzer.
- B. Branch FortiGate devices must be configured first.
- C. FortiGate uses FortiTelemetry protocol to communicate with FortiAnalyzer.
- D. All FortiGate devices in the Security Fabric must have bidirectional FortiTelemetry connectivity.
Answer: C,D
NEW QUESTION 55
An administrator has configured two FortiGate devices for an HA cluster. While testing the HA failover, the administrator noticed that some of the switches in the network continue to send traffic to the former primary unit. The administrator decides to enable the setting link-failed-signal to fix the problem .
Which statement is correct regarding this command?
- A. Disables all the non-heartbeat interfaces in all the HA members for two seconds after a failover.
- B. Sends a link failed signal to all connected devices.
- C. Sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.
- D. Forces the former primary device to shut down all its non-heartbeat interfaces for one second while the failover occurs.
Answer: D
NEW QUESTION 56
An LDAP user cannot authenticate against a FortiGate device.
Examine the real time debug output shown in the exhibit when the user attempted the authentication; then answer the question below.
Based on the output in the exhibit, what can cause this authentication problem?
- A. User student is not found in the LDAP server.
- B. The FortiGate has been configured with the wrong password for the LDAP administrator.
- C. User student is using a wrong password.
- D. The FortiGate has been configured with the wrong authentication schema.
Answer: A
NEW QUESTION 57
Refer to the exhibit, which contains the partial output of the get vpn ipsec tunnel details command.
Based on the output, which two statements are correct? (Choose two.)
- A. Phase 2 authentication is set to sha1 on both sides.
- B. Anti-replay is disabled.
- C. Hub2Spoke1 is configured on interface wan2.
- D. Hub2Spoke1 is a policy-based VPN.
Answer: A,C
NEW QUESTION 58
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
The administrator does not have access to the remote gateway.
Based on the debug output, what configuration changes can the administrator make to the local gateway to resolve the phase 1 negotiation error?
- A. Change phase 1 encryption to 3DES and authentication to SHA128.
- B. Change phase 1 encryption to AES128 and authentication to SHA512.
- C. Change phase 1 encryption to AESCBC and authentication to SHA2.
- D. Change phase 1 encryption to AES256 and authentication to SHA256.
Answer: D
NEW QUESTION 59
An administrator has configured a FortiGate device with two VDOMs: root and internal. The administrator has also created and inter-VDOM link that connects both VDOMs. The objective is to have each VDOM advertise some routes to the other VDOM via OSPF through the inter-VDOM link .
What OSPF configuration settings must match in both VDOMs to have the OSPF adjacency successfully forming? (Choose three.)
- A. OSPF interface area.
- B. OSPF interface MTU.
- C. Router ID.
- D. OSPF interface cost.
- E. Interface subnet mask.
Answer: A,B,E
NEW QUESTION 60
How does FortiManager handle FortiGuard requests from FortiGate devices, when it is configured as a local FDS?
- A. FortiManager supports only FortiGuard push to managed devices.
- B. FortiManager will respond to update requests only if they originate from a managed device.
- C. FortiManager does not support rating requests.
- D. FortiManager can download and maintain local copies of FortiGuard databases.
Answer: D
NEW QUESTION 61
View the exhibit, which contains the output of a web diagnose command, and then answer the question below.
Which one of the following statements explains why the cache statistics are all zeros?
- A. FortiGate is using a flow-based web filter and the cache applies only to proxy-based inspection.
- B. The FortiGuard web filter cache is disabled in the FortiGate's configuration.
- C. The administrator has reallocated the cache memory to a separate process.
- D. There are no users making web requests.
Answer: B
NEW QUESTION 62
Examine the following partial output from a sniffer command; then answer the question below.
What is the meaning of the packets dropped counter at the end of the sniffer?
- A. Number of packets that didn't match the sniffer filter.
- B. Number of packets that matched the sniffer filter and were dropped by the FortiGate.
- C. Number of packets that matched the sniffer filter but could not be captured by the sniffer.
- D. Number of total packets dropped by the FortiGate.
Answer: C
NEW QUESTION 63
Which the following events can trigger the election of a new primary unit in a HA cluster? (Choose two.)
- A. Primary unit stops sending HA heartbeat keepalives.
- B. One of the monitored interfaces in the primary unit is disconnected.
- C. A secondary unit is removed from the HA cluster.
- D. The FortiGuard license for the primary unit is updated.
Answer: A,B
NEW QUESTION 64
Examine the output from the BGP real time debug shown in the exhibit, then the answer the question below:
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. The state of the remote BGP peer will go to Connect after it confirms the received prefixes.
- B. The state of the remote BGP peer is OpenConfirm.
- C. BGP peers have successfully interchanged Open and Keepalive messages.
- D. Local BGP peer received a prefix fora default route.
Answer: C,D
NEW QUESTION 65
Four FortiGate devices configured for OSPF connected to the same broadcast domain. The first unit is elected as the designated router. The second unit is elected as the backup designated router.
Under normal operation, how many OSPF full adjacencies are formed to each of the other two units?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 66
Refer to the exhibit, which contains the output of a BGP debug command.
Which statement about the exhibit is true?
- A. The local router has not established a TCP session with 100.64.3.1.
- B. Since the counters were last reset, the 10.200.3.1 peer has never been down.
- C. The local router BGP state is OpenConfirm with the 10.127.0.75 peer.
- D. The local router has received a total of three BGP prefixes from all peers.
Answer: A
NEW QUESTION 67
View the exhibit, which contains the output of get sys ha status, and then answer the question below.
Which statements are correct regarding the output? (Choose two.)
- A. Master is selected because it is the only device in the cluster.
- B. port 7 is used the HA heartbeat on all devices in the cluster.
- C. The HA management IP is 169.254.0.2.
- D. The slave configuration is not synchronized with the master.
Answer: B,D
NEW QUESTION 68
Which two statements about the Security Fabric are true? (Choose two.)
- A. Only the root FortiGate collects network information and forwards it to FortiAnalyzer.
- B. Branch FortiGate devices must be configured first.
- C. All FortiGate devices in the Security Fabric must have bidirectional FortiTelemetry connectivity.
- D. FortiGate uses FortiTelemetry protocol to communicate with FortiAnalyzer.
Answer: A,C
NEW QUESTION 69
A FortiGate has two default routes:
All Internet traffic is currently using port1.
The exhibit shows partial information for one sample session of Internet traffic from an internal user:
What would happen with the traffic matching the above session if the priority on the first default route (IDd1) were changed from 5 to 20?
- A. Session would remain in the session table and its traffic would start using port2 as the outgoing interface.
- B. Session would remain in the session table and its traffic would keep using port1 as the outgoing interface.
- C. Session would remain in the session table and its traffic would be shared between port1 and port2.
- D. Session would be deleted, so the client would need to start a new session.
Answer: B
NEW QUESTION 70
View the exhibit, which contains the output of a diagnose command, and the answer the question below.
Which statements are true regarding the Weight value?
- A. Its initial value is statically set to 10.
- B. It determines which FortiGuard server is used for license validation.
- C. Its initial value is calculated based on the round trip delay (RTT).
- D. Its value is incremented with each packet lost.
Answer: D
NEW QUESTION 71
Which two statements about FortiManager is true when it is deployed as a local FDS? (Choose two.)
- A. It caches available firmware updates for unmanaged devices.
- B. It can be configured as an update server, or a rating server, but not both.
- C. It supports rating requests from both managed and unmanaged devices.
- D. It provides VM license validation services.
Answer: C,D
NEW QUESTION 72
Refer to the exhibit, which contains the output of diagnose sys session list.
If the HA ID for the primary unit is zero (0), which statement about the output is true?
- A. This session cannot be synced with the slave unit.
- B. The master unit is processing this traffic.
- C. This session is for HA heartbeat traffic.
- D. The inspection of this session has been offloaded to the slave unit.
Answer: B
NEW QUESTION 73
......
NSE7_EFW-7.0 dumps Sure Practice with 122 Questions: https://www.exam4tests.com/NSE7_EFW-7.0-valid-braindumps.html
NSE7_EFW-7.0 Practice Test Questions Answers Updated 122 Questions: https://drive.google.com/open?id=1mClvZW_Ja8Cr15RRTUD9RGeAnWrFUFv4