Practice Examples and Dumps & Tips for 2021 Latest 300-435 Valid Tests Dumps
Latest [Dec 07, 2021] 100% Passing Guarantee - Brilliant 300-435 Exam Questions PDF
How to book the 300-435 ENAUTO : Automating and Programming Cisco Enterprise Solutions Exam
These are following steps for registering the 300-435 exam.
- Step 1: Log into your account at Pearson VUE
- Step 2: Select Proctored Exams and enter the exam number, 300-435.
- Step 3: Follow the prompts to register.
NEW QUESTION 55
Refer to the exhibit.
NTP server 10.1.1.20 must be configured on the target Cisco IOS XE device without using authentication and logging. Which state should be added on a new line at the end of the Ansible task?
- A. state: installed
- B. state: true
- C. state: present
- D. state: started
Answer: C
NEW QUESTION 56
Refer to the exhibit.
A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit. What is the YANG data node that is referenced in the response?
- A. static-routes is a container
- B. route is a leaf list
- C. routing-instance is a container
- D. static-routes is a list
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/iosxml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.pdf
NEW QUESTION 57
Drag and drop the commands to the Ansible playbook that applies configuration to an interface on a Cisco IOS XE device. Not all options are used.
Answer:
Explanation:
NEW QUESTION 58
Refer to the exhibit.
A Python script is used to configure a Cisco IOS XE device. The script must be updated to print the IP addresses of all the loopback interfaces. Which statement should be added before the loop?
- A. interfaces = response.json()["ietf-interfaces:interfaces"]
- B. interface = response.json()["ietf-interfaces:interfaces"]["interface"]
- C. interface = response.json()["ietf-interfaces:interfaces"]
- D. interfaces = response.json()["ietf-interfaces:interfaces"]["interface"]
Answer: D
NEW QUESTION 59
When the Cisco DNA center intent API is used as part of an automation process what prompts receiving a HTTP 206 status code on a call?
- A. The client made a request that has been received but not yet acted upon.
- B. The client authentication credentials that are included with the request are missing or invalid.
- C. The client request was successful, but there is no content associated with the request.
- D. The client made a request for partial content matching a range header.
Answer: D
NEW QUESTION 60
Refer to the exhibit.
What is the correct ncclient method to use to collect the running configuration of a Cisco IOS XE device that uses NETCONF?
- A. config=m.get(source='running')
- B. config=m.get_config(source='running')
- C. config=m.copy_config(source='running')
- D. config=m.collect_config(source='running')
Answer: B
NEW QUESTION 61 
Refer to the exhibit. What is the result when running the Python scripts?
- A. s1, s2, s3
- B. s3
- C. s2
- D. s1
Answer: C
Explanation:
Section: Network Programmability Foundation
Explanation:
NEW QUESTION 62
Fill in the blanks to complete this API request against the Cisco SD_WAN vManage Statistics API, which specified a deviceId of 260faff9-2d31-4312-cf96-143b46db0211, a local-color of biz-internet, and a remote- color of gold.
Answer:
Explanation:
deviceId= , &local-color= , &remote-color=
NEW QUESTION 63
Refer to the exhibit.
What is the result when running the Python scripts?
- A. s1, s2, s3
- B. s3
- C. s2
- D. s1
Answer: C
Explanation:
NEW QUESTION 64
What is primary purpose of using the Cisco SD-WAN vManage Certificate Management API?
- A. to contact Enterprise Certificate Authority
- B. to report an issue to Cisco TAC
- C. to securely deploy vManage
- D. to install signed certificates
Answer: C
Explanation:
Section: Cisco SD-WAN
Explanation/Reference: https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_17.1/Configuration/ Certificates
NEW QUESTION 65
Fill in the blanks to complete this API request against the Cisco SD_WAN vManage Statistics API, which specified a deviceId of 260faff9-2d31-4312-cf96-143b46db0211, a local-color of biz-internet, and a remote- color of gold.
Answer:
Explanation:
deviceIdlocalcolorremotecolor
Reference:
https://sdwan-docs.cisco.com/Product_Documentation/Command_Reference/Command_Reference/ vManage_REST_APIs/Real-Time_Monitoring_APIs/Application-Aware_Routing#Statistics
NEW QUESTION 66 
Refer to the exhibit. A Python script must be created to deactivate vSmart Policy Cisco SD-WAN vManage Configuration APIs. The documentation states the URL is as shown in the exhibit for this REST call using POST, and that "policyId" is a required request parameter. Which line of Python code makes this call, assuming the variable "s" is a valid Requests session object and the variable "policy-id" is the policyId?
- A. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/', data = {'policyId':
policy_id}) - B. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate?policyId=%s' % policy_id)
- C. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/%s' % policy_id)
- D. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate&policyId=%s' % policy_id)
Answer: B
Explanation:
Section: Cisco SD-WAN
Explanation/Reference:
NEW QUESTION 67
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96- 143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.
Answer:
Explanation:
deviceId
NEW QUESTION 68
Refer to the exhibit. A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit. What are the two YANG data nodes and modules referenced in the response? (Choose two.)
- A. address is a container defined in the ietf-interfaces module
- B. The ethernetCsmacd type is imported from the iana-if-type module
- C. interface has the YANG data node type of container
- D. description is a key field defined in the interface list
- E. ipv4 is a container defined in the ietf-ip module
Answer: B,D
NEW QUESTION 69
Which two Netmiko methods are used to configure a device? (Choose two.)
- A. send_config_set()
- B. send_config()
- C. send_command()
- D. send_control_from_file()
- E. send_config_from_file()
Answer: A,E
Explanation:
Section: Network Device Programmability
Explanation/Reference: https://pynet.twb-tech.com/blog/automation/netmiko.html
NEW QUESTION 70
Refer to the exhibit.
A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit. What is the YANG data node that is referenced in the response?
- A. static-routes is a container
- B. routing-instance is a container
- C. static-routes is a list
- D. route is a leaf list
Answer: D
NEW QUESTION 71
A new project called "device_status" must be stored in a central Git repository called "device_status" with the first file named "device_status.py". The Git repository is created using the account python_programmer. Which set of commands inserts the project into Git?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
Explanation:
Reference:
https://help.github.com/en/github/importing-your-projects-to-github/adding-an-existing-project-togithub-using-the-command-line
https://help.github.com/en/github/importing-your-projects-to-github/adding-an-existing-project-togithub-using-the-command-line
NEW QUESTION 72
Refer to the exhibit.
Cisco SD-WAN deployment must be troubleshooted using vManage APIs. A call to vEdge Hardware Health API returns the data in the exhibit (only a portion is shown). If this JSON is converted to a Python dictionary and assigned to the variable "d", how the status is accessed that is indicated on line 16?
- A. d[data][0][statusList][0][status]
- B. d{'data'}[0]{'statusList'}[0]{'status'}
- C. d['data']['statusList']['status']
- D. d['data'][0]['statusList'][0]['status']
Answer: D
Explanation:
Explanation
The 0s in option AC and D are not logical in this scenario. The status tag already takes care of the error message.
NEW QUESTION 73
Which two methods are available to connect a Cisco IOS device to an active directory domain for authentication? (Choose two.)
- A. Directory Access Protocol
- B. DNS Based Authentication of Named Entities
- C. Lightweight Directory Access Protocol
- D. Microsoft Challenge-Handshake Authentication Protocol
- E. RADIUS server
Answer: C,E
Explanation:
Explanation/Reference:
NEW QUESTION 74
......
Topics of Cisco 300-435 Exam
To pick the appropriate preparation resources, you need to have a thorough understanding of the topics that are presented in the exam content. This knowledge will give you a chance to pass the 300-435 ENAUTO test with flying colors on the first try. All in all, these domains are listed as the following:
Network Programmability
This subject area covers 10% of the overall content and measures the knowledge and expertise of the candidates in carrying out the following technical tasks:
- Explaining the benefits of the Python virtual environments;
- Describing the benefits of utilizing the network configuration elements such as Ansible and Puppet to automate the platforms for IOS XE.
- Utilizing the basic version of control procedures with git, including push, clone, diff, add, commit, branching, and merging conflict;
- Explaining the patterns utilized and the challenges faced during the consumption of APIs asynchronously and synchronously;
- Interpreting the Python scripts that include data types, looping, conditions, functions, and classes;
Who Is the Target Audience for 300-435?
This test is suitable for anyone who wants to develop advanced skills in implementing Enterprise automated solutions. It validates one's knowledge of Python programming, programming concepts, APIs, automation tools, and controllers.
If you check the official 300-435 exam webpage, you won't find any prerequisites to meet to become eligible to take it and apply for the Cisco DevNet Specialist – Enterprise Automation and Programmability certification. However, the recommendation is to be familiar with Cisco Enterprise networking solutions.
Generally, this test targets network, system, and wireless engineers. Consulting system engineers, technical solutions architects, as well as network administrators and wireless design engineers can benefit from passing 300-435 ENAUTO and adding the certification to their resume.
300-435 are Available for Instant Access: https://www.exam4tests.com/300-435-valid-braindumps.html
300-435 Certification – Valid Exam Dumps Questions Study Guide: https://drive.google.com/open?id=10-4AuAtwbfIH9BPZlfgjfJowP-3lTv61