Provide Valid H19-427_V1.0-ENU Dumps To Help You Prepare For HCSE-Presales-Campus Network Planning and Design V1.0 Exam Nov 10, 2025
Huawei H19-427_V1.0-ENU Dumps Questions [2025] Pass for H19-427_V1.0-ENU Exam
NEW QUESTION # 103
Deploy Navi When the Ac function is used, which of the following statements is correct?
- A. Local AC and Navi AC must ensure that the service VLAN, SSID, user isolation, and authentication mode configurations under the corresponding VAP template are consistent.
- B. Local AC and Navi AC support dual-link backup
- C. Local AC and Navi AC versions can guarantee inconsistency
- D. Navi AC supports cross-Navi AC roaming
Answer: A
NEW QUESTION # 104
As a management service provider, MSP is responsible for providing cloud-based equipment and cloud network services to tenants. When a tenant requests maintenance services from the MSP, the MSP can manage the tenant's network services through iMaster NCE-Campus.
- A. Error
- B. Correct
Answer: B
NEW QUESTION # 105
In the CloudCampus Huawei public cloud deployment scenario, which of the following push methods does the portal authentication page on the cloud management platform support?
- A. Push portal page by SSID
- B. Push portal page by terminal IP address
- C. Push portal page by access device
- D. Push portal pages by time period
Answer: A,B,C,D
NEW QUESTION # 106
In WLAN enterprise campus networks, regarding SSID planning, which of the following is not recommended?
- A. Planning for Visitors SSID , using MAC+Portal authentication
- B. The same SSID provides 802.1x authentication for employees and Portal authentication for guests.
- C. Plan a public SSID as the pre-authentication domain
- D. Plan a dedicated SSID for employees and use 802.1x authentication
Answer: B
NEW QUESTION # 107
DHCP deployment requires the use of optional fields in the DHCP message. In IPv4 or IPV6 networks, the DHCP server passes the controller address information to the CPE through Option 148.
- A. Error
- B. Correct
Answer: A
NEW QUESTION # 108
What technology does Huawei's SD-WAN solution use to achieve intelligent routing?
- A. ACL
- B. Equal-cost routing
- C. Static routing
- D. SPR
Answer: D
NEW QUESTION # 109
Which of the following descriptions about Cloud Campus is incorrect? (Single)
- A. When a user creates a site on iMaster and adds devices to the site, the system supports adding devices one by one and importing devices in batches.
- B. After the device is online on iMaster NCE, iMaster NCE can automatically discover the network topology.
- C. Support device to go online first, and then users can log in to iMaster Complete network planning on the NCE.
- D. Supports completing network topology planning on iMaster first. Then the device goes online. Topology error correction is not supported during this process.
Answer: D
NEW QUESTION # 110
In the network access control scheme, before the user is successfully authenticated, in order to meet some basic network access needs, such as updating the virus database, etc., the user can obtain access to some networks through the authentication-free rules. However, once the user fails the authentication, he will not be able to access the network.
- A. Error
- B. Correct
Answer: B
NEW QUESTION # 111
Different messages use different message priorities.
Which of the following descriptions of message priority is incorrect?
- A. The 802.11 packets sent by the STA carry the UP priority or DSCP priority.
- B. To maintain the packet priority as it passes through different networks, the priority field configured on the device must remain unchanged. Priority mapping cannot be performed.
- C. VLAN packets in a wired network use 802.1p priority, and IP packets use DSCP priority.
- D. To maintain the priority of packets as they pass through different networks, you need to configure a mapping between priority fields on the device.
Answer: B
NEW QUESTION # 112
Regarding Huawei's SD-WAN solution, which of the following statements about RR deployment is incorrect?
- A. Only supports co-deployment of RR and HUB sites
- B. Support RR independent deployment
- C. Support RR multi-region deployment
- D. Support RR and site co-deployment
Answer: A
NEW QUESTION # 113
Which of the following descriptions about WLAN Layer 2 networking is correct?
- A. AP can directly discover AC through local broadcast
- B. Business data must pass through AC
- C. AC and AP are in the same broadcast domain
- D. Suitable for complex and sophisticated WLAN networking in large enterprises
Answer: A,C
NEW QUESTION # 114
In dual-link networking, the AP will start to establish a link with the backup AC only after the configuration is delivered to the primary AC.
- A. Error
- B. Correct
Answer: A
NEW QUESTION # 115
In iMaster NCE-Campus network planning, when there is no special isolation requirement, which networking method is recommended?
- A. Flat networking
- B. Two-plane networking
- C. Three-plane networking
- D. Four-plane networking
Answer: B
NEW QUESTION # 116
In some special environments, it is necessary to use more AR channels that cannot be completely separated. You can consider appropriately reducing the AP's transmit power to reduce interference.
- A. Error
- B. Correct
Answer: B
NEW QUESTION # 117
A customer's existing network has many older terminals with low roaming sensitivity. This often results in terminals not initiating roaming even when signal strength is very low, resulting in a poor user experience. The customer requires terminals to be able to switch to other APs when signal strength falls below -75dm. Therefore, the customer enabled the weak signal user offline control function on the wireless controller.
Which of the following configuration commands for controlling the offline of weak signal users is correct?
- A. [WAC-wlan-view ] rrm-profile name test
[WAC-wlan-rm-prof-test] undo smart-roam quick-kickoff - threshold disable
[WA C -wlan-rm-prof-test] smart-roam quick-kickoff-threshold check-snr
[WAC-wlan-rrm-prof-test] smart-roam q uick-kickoff-threshold snr 75 - B. [WAC-wlan-view] rm-profile name test
[WAC-wlan-rm-prof-test] smart-roam quick-kickoff-threshold enable
[WAC-wlan-rm-prof-test] smart-roam quick-kickoff-threshold check-snr
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-threshold snr 20 - C. [WAC-wlan-view] rrm-profile name test
[WAC-wlan-rm-prof-test] undo smart-roam quick-kickoff-threshold disable
[WAC-wlan-rm-prof-test] smart-roam quick-kickoff-threshold check-snr
[WAC-wlan-rm-prof-test] smart-roam quick-kickoff-threshold snr 20 - D. [WAC-wlan-view ] rrm-profile name test
[WAC-wlan-rm-pro-test] smart-roam quick-kickoff-threshold enable
[WAC-wlan-rm-prof-test] smart-roam quick-kickoff-threshold check-snr
[WAC - wlan-rrm-prof-test] smart-roam quick-kickoff-threshold snr 75
Answer: C
NEW QUESTION # 118
In the CloudCampus solution, the switch does not support connection with a third-party RADIUS server to implement 802.1X authentication.
- A. Error
- B. Correct
Answer: A
NEW QUESTION # 119
Which of the following statements about IPv6 terminal access solutions in WLAN services is correct?
- A. Configure different VLANs for guest SSIDs. Use the core switch or WAC as the gateway for wireless access guest terminals. Use a hybrid SLAAC solution to assign IPv6 addresses. MAC authentication is recommended.
- B. If there are terminals that cannot obtain DNS information through SLAAC, it is recommended to configure an IPv6 static address solution on the gateway.
- C. The core switch or WAC serves as the gateway for wireless access office terminals. A hybrid SLAAC solution can be used to configure IPv6 addresses for the terminals. Authentication methods include 802.1x and Portal+MA
Answer: C
NEW QUESTION # 120
What is the typical KPI for indoor coverage in WLAN network planning?
- A. 95% of the area RSS1>=65dBm
- B. 95% of the area RSS1>=60dBm
- C. 95% of the area RSS1>=-55dBm
- D. 95% of the area RSSI>=70dBm
Answer: A
NEW QUESTION # 121
An IWG (interworking Gateway) system can simultaneously provide site connectivity services between SD-WAN sites and existing traditional MPLS VPN networks for multiple enterprise tenants, making it the most economical and affordable option for operators.
- A. Error
- B. Correct
Answer: B
NEW QUESTION # 122
Huawei's WLAN focus on the IOT (Internet of Things) sector: Building a pipeline-based technology platform and ecosystem, leveraging partners' expertise in the IOT field, achieving multi-network convergence, and maximizing customer benefits. Which of the following are its advantages?
- A. AP provides site and communication channels
- B. Wi-Fi and IOT multi-network integration
- C. Solved site design and power supply issues
- D. iMasterNCE unified management of IoT cards
Answer: A,B,C,D
NEW QUESTION # 123
Which routing algorithm should be used in the following scenario: An enterprise leases three links: Telecom MPLS, Internt1, and Internet2. VoIP prioritizes the MPLS link. When the MPLS link is congested, low-priority applications are dispatched to other links to prevent MPLS link quality degradation from affecting VoIP services.
- A. Link quality routing
- B. Bandwidth routing
- C. Load balancing routing
- D. Application priority routing
Answer: D
NEW QUESTION # 124
In the LAN-WAN convergence scenario, which of the following descriptions of RR deployment design principles is incorrect? ( )
- A. RR must be redundantly configured. A network must have at least two RR devices to prevent a single RR device from causing network-wide service interruption if the RR device fails.
- B. Choose an independent RR if possible. In an independent RR scenario, a single device can be deployed:
- C. The Edge should be dual-uplinked to two RR devices to achieve egress backup;
- D. Use the RR model recommended in the specification list:
Answer: B
NEW QUESTION # 125
......
Achieve Success in Actual H19-427_V1.0-ENU Exam H19-427_V1.0-ENU Exam Dumps: https://www.exam4tests.com/H19-427_V1.0-ENU-valid-braindumps.html
Updated Huawei Study Guide H19-427_V1.0-ENU Dumps Questions: https://drive.google.com/open?id=11N5EGVznCRN_Sj7WU-1NZjts4Ek0ynWs