[UPDATED] SAP C_S4TM_2023 Certification Exam Questions
Quickly and Easily Pass SAP Exam with C_S4TM_2023 real Dumps
SAP C_S4TM_2023 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 37
To which of the following can you assign instruction sets? Note: There are 2 correct answers to this question.
- A. Forwarding order type
- B. Movement type
- C. Stage type
- D. Freight order type
Answer: A,C
Explanation:
In SAP S/4HANA Transportation Management for Logistics Service Providers (LSPs), instruction sets provide standardized instructions for transportation processes. According to the SAP documentation, instruction sets can be assigned to:
* Stage type (A): Instruction sets are linked to stage types to define specific instructions for each stage of a forwarding order, such as loading or customs handling.
* Forwarding order type (C): Instruction sets are assigned to forwarding order types to provide default instructions for the entire order, ensuring consistency in LSP scenarios.
The other options are incorrect:
* Movement type (B)is used for defining stage sequences or transportation modes but does not support instruction set assignments.
* Freight order type (D)is used for execution documents and typically does not include instruction sets, which are more relevant to forwarding orders in LSP scenarios.
Reference:
SAP S/4HANA Cloud Private Edition, Transportation Management Study Guide: Unit 6 - Transportation Management for LSP, Section on Instruction Sets.
SAP Help Portal: Transportation Management - Instruction Sets in LSP ().
NEW QUESTION # 38
You want to ensure that the system interprets rates from a rate table as percentages. Where do you have to set the percentage indicator? Note: There are 2 correct answers to this question.
- A. Rate table
- B. Scale
- C. Calculation sheet
- D. Calculation profile
Answer: A,C
NEW QUESTION # 39
Where can you initiate carrier selection? Note: There are 2 correct answers to this question.
- A. From SAP Business Network for Logistics
- B. From the container unit user interface
- C. From the freight booking user interface
- D. From report/SCMTMS/PLN_OPT
Answer: C,D
Explanation:
Freight Order Management
NEW QUESTION # 40
What happens if you unassign a freight unit that has blocked a freight order because of a discrepancy?
- A. The block is removed from both the freight unit and the freight order.
- B. The block remains on the freight order but is removed from the freight unit.
- C. The block remains on the freight unit and the freight order.
- D. The block remains on the freight unit but is removed from the freight order.
Answer: D
Explanation:
Transportation Management Overview and Fundamentals
NEW QUESTION # 41
Logistics service providers (LSPs or 3PLs) can also receive transportation requirements. For transportation service providers (TSP) and logistics service providers (LSP), forwarding orders are created in one of two ways - manually, using the SAP TM Ul, or through integration with an external system via electronic data interchange (EDI).
The following are transportation management triggers:
There are 4 correct answers to this question.
Response:
- A. locations are stored on root level.
- B. Sales order returns
- C. Purchase orders
- D. Sales orders
- E. Purchase order returns
Answer: B,C,D,E
NEW QUESTION # 42
The Core Interface (CIF) is important for its role in which of these processes: Please choose the correct answer.
- A. Logging events in the transportation process.
- B. Integrating data from mobile apps.
- C. Replicating master data between an SAP ERP and SAP TM system.
- D. Integrating geographical information to render maps on screen.
Answer: C
NEW QUESTION # 43
When using dispute management, which activities can a carrier perform in the carrier collaboration portal? Note: there are 2 correct answers to this question.
- A. Upload files
- B. Add a detention charge
- C. Change the quantity of a charge line's calculation base
- D. Change the document currency
Answer: B,C
NEW QUESTION # 44
To which document type would you assign the event profile to calculate event-based charges in a rail transport?
- A. Freight order
- B. Transportation unit
- C. Freight unit
- D. Freight booking
Answer: D
NEW QUESTION # 45
Which of the following driver management settings are maintained in freight order customization?
- A. Default driver
- B. Default truck handling
- C. Number of required drivers
- D. Home location
Answer: D
Explanation:
Transportation Management for Logistics Service Provider (LSP)
NEW QUESTION # 46
What is the cardinality between purchasing organizations and carriers in a freight agreement RFQ master?
- A. 1 purchasing organization to N carriers
- B. N purchasing organizations to M carriers
- C. N purchasing organizations to 1 carrier
- D. 1 purchasing organization to 1 carrier
Answer: A
NEW QUESTION # 47
Which of the following API types does SAP recommend to use to achieve clean core integrations? Note:
There are 2 correct answers to this question.
- A. OData
- B. RFC
- C. SOAP
- D. IDoc
Answer: A,C
Explanation:
Managing Clean Core
NEW QUESTION # 48
Which of the following driver management settings are maintained in freight order customization?
- A. Default driver
- B. Resource requirements
- C. Default truck handling
- D. Home location
Answer: D
Explanation:
In SAP S/4HANA Transportation Management, driver management settings for freight orders are configured in the freight order type customization. According to the SAP documentation, thehome location (C)is a key setting maintained in freight order customization, specifying the base location for drivers assigned to freight orders. This setting helps in planning and scheduling by considering the driver's starting point.
The other options are incorrect:
* Default truck handling (A)is not a standard setting in freight order customization; it may relate to vehicle resource configuration.
* Default driver (B)is assigned in vehicle resources or planning profiles, not directly in freight order type customization.
* Resource requirements (D)(corrected from "Number of required drivers" in the original document for clarity) are defined in vehicle resources or planning settings, not freight order customization.
Reference:
SAP S/4HANA Cloud Private Edition, Transportation Management Study Guide: Unit 1 - Transportation Management Overview and Fundamentals, Section on Driver Management in Freight Orders.
SAP Help Portal: Transportation Management - Freight Order Customization ().
NEW QUESTION # 49
You have defined several means of transport MT combinations.
If food is loaded on the truck, you cannot transport hazardous goods in a coupled trailer, furthermore, these hazardous goods cannot be transported on certain means of transport.
Which of the following incmpatibility types do you use to model this scenario? (2 correct answer)
- A. FU - FU (MT combination level)
- B. FU - vehicle resource
- C. FU - FU (vehicle level)
- D. FU - FU ( compartment level)
Answer: C,D
NEW QUESTION # 50
You want to record the following events in the freight unit and the associated freight order:
Planning the freight unit Loading begin Arrival at destination Proof of delivery How many event handlers are created for this purpose?
Please choose the correct answer.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 51
In the logistics integration profile, the Incoterm location stage building is set to "Source location to Incoterm location- type 1". You create a sales order in which you specify an Incoterm and Incoterm location. What will be the result of these settings?
- A. Two stages created: An active stage from the source location to the Incoterm location, and an additional non-planning-relevant stage from the Incoterm location to the destination location
- B. One stage created: An active stage from the source location to the Incoterm location
- C. Two stages created: An active stage from the Incoterm location to the destination location, and an additional non-planning-relevant stage from the source location to the Incoterm location
- D. One stage created: An active stage from the Incoterm location to the destination location
Answer: C
Explanation:
In SAP S/4HANA Transportation Management, the logistics integration profile defines how stages are created based on Incoterms and Incoterm locations specified in a sales order. When the setting is "Source location to Incoterm location - type 1," the system creates stages as follows:
* Anactive stage from the Incoterm location to the destination location, which is planning-relevant and managed in transportation management.
* Anon-planning-relevant stage from the source location to the Incoterm location, which is created for documentation purposes but not actively planned in SAP TM.
According to the SAP documentation, this configuration reflects the Incoterm responsibility split, where the Incoterm location marks the point where responsibility shifts (e.g., from seller to buyer). Thus,two stages are created (B): one active stage for the transport leg after the Incoterm location and one non-planning-relevant stage before it.
The other options are incorrect:
* AandDonly account for one stage, ignoring the additional non-planning-relevant stage.
* Creverses the active and non-planning-relevant stages, which does not align with the "type 1" setting.
Reference:
SAP S/4HANA Cloud Private Edition, Transportation Management Study Guide: Unit 1 - Transportation Management Overview and Fundamentals, Section on Incoterm Stage Building.
SAP Help Portal: Transportation Management - Logistics Integration Profile ().
NEW QUESTION # 52
Which of the following elements are part of the transportation network?
There are 3 correct answers to this question.
Response:
- A. Transportation Lane
- B. Location
- C. Business Partner
- D. Transportation Zone
Answer: A,B,D
NEW QUESTION # 53
What is used to transfer stock transport orders from SAP ERP to SAP TM?
- A. Post processing framework
- B. Workflow
- C. Core interface
- D. Output Determination
Answer: B
NEW QUESTION # 54
Assuming an agreement determination condition is NOT used, which of the following involved parties determine the correct freight agreement for charge calculation in a freight order? Note: There are 2 correct answers to this question.
- A. Purchasing organization
- B. Ordering party
- C. Executing carrier
- D. Carrier
Answer: A,D
NEW QUESTION # 55
There is one order-based transportation requirement (OTR) with the following items (see attached table) the relevant freight unit building rule users. How many freight units will be created?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 56
In which document types can you enable cost distribution in SAP TM?
There are 2 correct answers to this question.
- A. Freight order
- B. Freight settlement document
- C. Freight unit
- D. Forwarding settlement document
Answer: A,B
NEW QUESTION # 57
For which of the following documents is it possible to do forward and backward scheduling in the transportation cockpit?
- A. Freight order
- B. Freight unit
- C. Forwarding order
- D. Sales order
Answer: A
NEW QUESTION # 58
For which of the following documents is it possible to do forward and backward scheduling in the transportation cockpit?
- A. Freight order
- B. Freight unit
- C. Forwarding order
- D. Sales order
Answer: A
Explanation:
Transportation Management Overview and Fundamentals
NEW QUESTION # 59
......
Start your C_S4TM_2023 Exam Questions Preparation: https://www.exam4tests.com/C_S4TM_2023-valid-braindumps.html
Realistic C_S4TM_2023 Dumps Questions To Gain Brilliant Result: https://drive.google.com/open?id=1tRGvIcHTcDvWJDJwDHqt5Xk7vsjY3ufT