IN101_V7 Dumps Free Test Engine Player Verified Updated [Jun 26, 2026]
Q&As with Explanations Verified & Correct Answers
NEW QUESTION # 68
Which of the following make the biggest impression on a customer during face-to-face conversation?
- A. Tone of voice
- B. Body language
- C. Choice of words
Answer: B
NEW QUESTION # 69
Which of the following steps should be performed first when terminating a coaxial cable?
- A. Strip the cable
- B. Fold back the braiding
- C. Verify connector type
- D. Cut the cable
Answer: C
NEW QUESTION # 70
During the troubleshooting phase, what is the first step?
- A. Verify
- B. Repair
- C. Test
- D. Isolate
Answer: A
NEW QUESTION # 71
Which phase of testing includes documenting the test results?
- A. Phase 1
- B. Phase 3
- C. Phase 2
Answer: B
NEW QUESTION # 72
Which tool is required to pull backbone cable of significant weight?
- A. Pulling eye
- B. Tugger
- C. Pull string
- D. Furcating harness
Answer: B
NEW QUESTION # 73
Which of the following is used to measure the length of a 4-pair cable?
- A. Pair scanner
- B. Cable-end locator kit
- C. Time domain reflectometer (TDR)
- D. Tone generator
Answer: C
NEW QUESTION # 74
The information transmitted by an ICT system can originate in two fundamental forms:
- A. Light and sound
- B. Analog and digital
- C. Progressive and regressive
- D. Synchronous and asynchronous
Answer: B
NEW QUESTION # 75
How far should the top of a ladder extend above the roofline?
- A. 0.3 m (1')
- B. 0.5 m (1.6')
- C. 0.6 m (2')
- D. 0.9 m (3')
Answer: D
NEW QUESTION # 76
Which type of cabling is installed between a main cross connect and a horizontal cross connect?
- A. First-level backbone
- B. Second-level backbone
- C. Horizontal
Answer: A
NEW QUESTION # 77
Which of the following markings indicates that the cable is designed for use in a plenum space?
- A. CMUC
- B. CMP
- C. CMR
- D. CMX
Answer: B
NEW QUESTION # 78
Which of the following terms describes the ration of the power of the outgoing signal to the power of the reflected signal expressed in decibels?
- A. Return loss
- B. Mutual capacitance
- C. Insertion loss
- D. Characteristic impedance
Answer: A
NEW QUESTION # 79
What is the required physical topology for a SCS?
- A. Star
- B. Bus
- C. Ring
- D. Tree
Answer: A
NEW QUESTION # 80
Which of the following describes a nonmechanical firestop system that forms a hard char when exposed to flame?
- A. Intumescent
- B. Endothermic
- C. Ablative
- D. Elastomeric
Answer: C
NEW QUESTION # 81
Which of the following components is used to bond the electrical system's grounding electrode system to the PBB?
- A. RBB
- B. TBB
- C. BBC
- D. TBC
Answer: D
NEW QUESTION # 82
What is the characteristic impedance of Series-6 coaxial cable?
- A. 100 ohms
- B. 75 ohms
- C. 25 ohms
- D. 50 ohms
Answer: B
NEW QUESTION # 83
Which of the following is a floor serving space that serves as a point of termination for horizontal and backbone cables?
- A. Work area
- B. ER
- C. EF
- D. TR
Answer: D
NEW QUESTION # 84
How many cycles are in 10Hz?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 85
Which of the following must be measured before the length of a coaxial cable can be calculated?
- A. Propagation delay
- B. DC loop resistance
- C. Delay skew
- D. Insertion loss
Answer: B
NEW QUESTION # 86
Which of the following types of cable produces very little smoke when burned?
- A. CMUC
- B. CMG
- C. LSZH
- D. CM
Answer: C
NEW QUESTION # 87
Which of the following is the first step of the emergency rescue process?
- A. Notify someone
- B. Survey the scene
- C. Secure the area
- D. Contact 911
Answer: B
NEW QUESTION # 88
Which of the following is used to perform continuity and length tests for coaxial cable?
- A. TDR (Time domain reflectometer) with an adapter
- B. OTDR (optical time domain reflectometer
- C. OLTS (optical loss test set)
- D. VFL (visual fault locator)
Answer: A
NEW QUESTION # 89
......
BICSI IN101_V7 (BICSI Installer 1) Certification Exam is a comprehensive assessment designed to evaluate the knowledge, skills, and abilities of individuals who are interested in pursuing a career in the cabling and wiring industry. BICSI Installer 1 Exam certification is offered by Building Industry Consulting Service International (BICSI), which is recognized globally as a leading professional association in the information and communications technology (ICT) industry.
Verified IN101_V7 dumps Q&As Latest IN101_V7 Download: https://www.exam4tests.com/IN101_V7-valid-braindumps.html
IN101_V7 Dumps with Free 365 Days Update Fast Exam Updates: https://drive.google.com/open?id=1Tk51XqIZAEmKMNWy5XDVTrKuqIJmDFre