Use the best ways of preparing for 300-715 Exam Dumps with Exam4Tests Cisco 300-715 dump PDF [2023]
Cisco 300-715 exam candidates will surely pass the Exam if they consider the 300-715 dumps learning material presented by Exam4Tests.
NEW QUESTION # 80
An administrator is configuring posture with Cisco ISE and wants to check that specific services are present on the workstations that are attempting to access the network. What must be configured to accomplish this goal?
- A. Create an application posture condition using a OPSWAT API version.
- B. Create a service posture condition using a non-OPSWAT API version.
- C. Create a registry posture condition using a non-OPSWAT API version.
- D. Create a compound posture condition using a OPSWAT API version.
Answer: B
NEW QUESTION # 81
What is a function of client provisioning?
- A. Client provisioning ensures that endpoints receive the appropriate posture agents.
- B. Client provisioning ensures an application process is running on the endpoint.
- C. Client provisioning checks the existence, date, and versions of the file on a client.
- D. Client provisioning checks a dictionary attribute with a value.
Answer: B
NEW QUESTION # 82
A Cisco ISE server sends a CoA to a NAD after a user logs in successfully using CWA Which action does the CoA perform?
- A. It triggers the NAD to reauthenticate the client
- B. It applies new permissions provided in the CoA to the client session.
- C. It terminates the client session
- D. It applies the downloadable ACL provided in the CoA
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/113362-config-web-auth-ise-00.html
NEW QUESTION # 83
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
NEW QUESTION # 84
An engineer is designing a BYOD environment utilizing Cisco ISE for devices that do not support native supplicants Which portal must the security engineer configure to accomplish this task?
- A. Client provisioning
- B. My devices
- C. MDM
- D. BYOD
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide
NEW QUESTION # 85
What service can be enabled on the Cisco ISE node to identify the types of devices connecting to a network?
- A. central web authentication
- B. MAB
- C. posture
- D. profiling
Answer: D
Explanation:
Section: Profiler
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/ b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION # 86
Refer to the exhibit:
Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication interface gigabitethemet2/0/36
- B. show authentication sessions mac 000e.84af.59af details
- C. show authentication sessions method
- D. show authentication registrations
Answer: B
NEW QUESTION # 87
A user changes the status of a device to stolen in the My Devices Portal of Cisco ISE. The device was originally onboarded in the BYOD wireless Portal without a certificate. The device is found later, but the user cannot re-onboard the device because Cisco ISE assigned the device to the Blocklist endpoint identity group. What must the user do in the My Devices Portal to resolve this issue?
- A. Change the BYOD registration attribute of the device to None.
- B. Change the device state from Stolen to Not Registered.
- C. Delete the device, and then re-add the device.
- D. Manually remove the device from the Blocklist endpoint identity group.
Answer: B
NEW QUESTION # 88
A network administrator is setting up wireless guest access and has been unsuccessful in testing client access.
The endpoint is able to connect to the SSID but is unable to grant access to the guest network through the guest portal. What must be done to identify the problem?
- A. Use traceroute to ensure connectivity.
- B. Use the endpoint ID to execute a session trace.
- C. Use the identity group to validate the authorization rules.
- D. Use context visibility to verify posture status.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide
NEW QUESTION # 89
An engineer is configuring the remote access VPN to use Cisco ISE for AAA and needs to conduct posture checks on the connecting endpoints After the endpoint connects, it receives its initial authorization result and continues onto the compliance scan What must be done for this AAA configuration to allow compliant access to the network?
- A. Ensure that authorization only mode is not enabled
- B. Fix the CoA port number
- C. Enable dynamic authorization within the AAA server group
- D. Configure the posture authorization so it defaults to unknown status
Answer: C
NEW QUESTION # 90
Which term refers to an endpoint agent that tries to join an 802 1X-enabled network?
- A. authenticator
- B. client
- C. EAP server
- D. supplicant
Answer: A
NEW QUESTION # 91
What must match between Cisco ISE and the network access device to successfully authenticate endpoints?
- A. shared secret
- B. SNMP version
- C. certificate
- D. profile
Answer: A
Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_network_devices.html
NEW QUESTION # 92
An engineer is designing a BYOD environment utilizing Cisco ISE for devices that do not support native supplicants Which portal must the security engineer configure to accomplish this task?
- A. Client provisioning
- B. My devices
- C. MDM
- D. BYOD
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01111.html
NEW QUESTION # 93
An employee logs on to the My Devices portal and marks a currently on-boarded device as 'Lost'.
Which two actions occur within Cisco ISE as a result oí this action? (Choose two)
- A. The device access has been denied
- B. BYOD Registration status is updated to Unknown.
- C. BYOD Registration status is updated to No
- D. Certificates provisioned to the device are not revoked
- E. The device status is updated to Stolen
Answer: C,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01111.html
NEW QUESTION # 94
An engineer is configuring 802.1X and wants it to be transparent from the users' point of view. The implementation should provide open authentication on the switch ports while providing strong levels of security for non-authenticated devices. Which deployment mode should be used to achieve this?
- A. closed
- B. high-impact
- C. open
- D. low-impact
Answer: D
Explanation:
https://www.lookingpoint.com/blog/cisco-ise-wired-802.1x-deployment-monitormode#:~:text=Low%20impact%20mode%20works%20similar,DHCP%2C%20PXE%20boot%2C%20etc.
NEW QUESTION # 95
A network administrator changed a Cisco ISE deployment from pilot to production and noticed that the JVM memory utilization increased significantly. The administrator suspects this is due to replication between the nodes What must be configured to minimize performance degradation?
- A. Review the profiling policies for any misconfiguration
- B. Enable the endpoint attribute filter
- C. Ensure that Cisco ISE is updated with the latest profiler feed update
- D. Change the reauthenticate interval.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/admin_guide/b_ise_admin_guide_23/b_ise_admin_guide_23_chapter_010111.html
NEW QUESTION # 96
An administrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE. what must be done to accomplish this configuration?
- A. Enable the privilege levels in Cisco ISE
- B. Enable the privilege levels in the IOS devices.
- C. Define the command privileges for levels 2-5 in Cisco ISE
- D. Define the command privileges for levels 2-5 in the IOS devices
Answer: B
Explanation:
https://learningnetwork.cisco.com/s/blogs/a0D3i000002eeWTEAY/cisco-ios-privilege-levels
NEW QUESTION # 97
What is the condition that a Cisco ISE authorization policy cannot match?
- A. company contact
- B. posture
- C. device type
- D. time
- E. custom
Answer: E
NEW QUESTION # 98
Which command displays all 802.1X/MAB sessions that are active on the switch ports of a Cisco Catalyst switch?
- A. show authentication sessions
- B. show authentication sessions output
- C. show authentication sessions interface Gi1/0/x output
- D. show authentication sessions interface Gi 1/0/x
Answer: D
Explanation:
Section: Policy Enforcement
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/s1/sec-s1-xe-3se-3850-cr-book/sec-s1- xe-3se-3850-cr-book_chapter_01.html#wp3404908137
NEW QUESTION # 99
An engineer is creating a new TACACS* command set and cannot use any show commands after togging into the device with this command set authorization Which configuration is causing this issue?
- A. The wildcard command listed is in the wrong format
- B. The command set is allowing all commands that are not in the command list
- C. The command set is working like an ACL and denying every command.
- D. Question marks are not allowed as wildcards for command sets.
Answer: D
NEW QUESTION # 100
By default, which traffic does an 802.IX-enabled switch allow before authentication?
- A. no traffic
- B. all traffic
- C. traffic permitted in the port dACL on Cisco ISE
- D. traffic permitted in the default ACL on the switch
Answer: D
NEW QUESTION # 101
A network administrator is configuring authorization policies on Cisco ISE There is a requirement to use AD group assignments to control access to network resources After a recent power failure and Cisco ISE rebooting itself, the AD group assignments no longer work What is the cause of this issue?
- A. The network devices ports are shut down.
- B. The AD DNS response is slow.
- C. The AD join point is no longer connected.
- D. The certificate checks are not being conducted.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/ise_active_directory_integration/b_ISE_AD_integration_
NEW QUESTION # 102
A network engineer is configuring Cisco TrustSec and needs to ensure that the Security Group Tag is being transmitted between two devices Where in the Layer 2 frame should this be verified?
- A. Payload
- B. CMD filed
- C. 802.1 AE header
- D. 802.1Q filed
Answer: B
Explanation:
https://www.cisco.com/c/dam/global/en_ca/assets/ciscoconnect/2014/pdfs/policy_defined_segmentation_with_trustsec_rob_bleeker.pdf (slide 25)
NEW QUESTION # 103
......
Full 300-715 Practice Test and 240 unique questions with explanations waiting just for you, get it now: https://drive.google.com/open?id=1QF3TLK8bqauYQmRGNuivTbAFLEb6gQTw
Accurate & Verified Answers As Seen in the Real Exam here: https://www.exam4tests.com/300-715-valid-braindumps.html